Mea kūʻai aku ma ka pūnaewele ʻo Porcelain Ceramic Industrial Grade Water Absorbent Additive Carboxymethyl Cellulose Powder CMC
ʻO kā mākou hoʻomaikaʻi ʻana e pili ana i ka ʻenehana loea, nā talena koʻikoʻi a me ka hoʻoikaika pinepine ʻana i nā ʻenehana no ka Online Exporter Porcelain Ceramic Industrial Grade Water Absorbent Additive Carboxymethyl Cellulose Powder CMC, Ke nānā nei mākou i ka hana ʻana i nā huahana maikaʻi loa e hoʻolako i ka lawelawe no kā mākou mea kūʻai aku e hoʻokumu i ka lanakila lōʻihi. -lanakila pili.
ʻO kā mākou hoʻomaikaʻi ʻana e pili ana i nā mea hana maʻalahi, nā talena koʻikoʻi a me nā pūʻali ʻenehana i hoʻoikaika pinepine ʻia noʻO Kina Carboxymethyl Cellulose a me CMC Maʻemaʻe Kiʻekiʻe, I kēia lā, loaʻa iā mākou nā mea kūʻai mai ka honua holoʻokoʻa, me USA, Russia, Sepania, Italia, Singapore, Malaysia, Thailand, Polani, Iran a me Iraq. ʻO ka misionari o kā mākou hui e hāʻawi i nā huahana kiʻekiʻe loa me ke kumukūʻai maikaʻi loa. Ua kakali mākou i ka hana ʻoihana me ʻoe!
Hōʻike huahana
NĀ CAS NO.:9004-65-3
ʻO Hydroxypropyl Methylcellulose (HPMC), i kapa ʻia ʻo hypromellose, he ʻano o ka non-ionic cellulose ether. He semi-synthetic, inactive, viscoelastic polymer. Hoʻohana pinepine ʻia i ka ophthalmology ma ke ʻano he ʻoihana lubrication, a i ʻole he excipient a excipient paha i ka lāʻau lapaʻau waha. Loaʻa maʻamau i nā ʻano mea kūʻai like ʻole. Ma ke ʻano he mea hoʻohui meaʻai, hiki i ka hypromellose ke pāʻani i kēia mau hana: emulsifier, thickener, suspending agent a me kahi pani no ka gelatin holoholona, e hana like me ka mānoanoa, binder, film-former, surfactant, colloid pale, lubricant, emulsifier, a me ka hoʻokuʻu ʻana a me ka mālama wai. kokua.
Hiki ke ʻike ʻia ʻo Hydroxypropyl Methylcellulose (HPMC) Construction Grade ma ke ʻano he huaʻōlelo maʻamau no ka etherification cellulose ethers. ʻO ka mea maʻamau i kēia mau cellulose ethers ka methoxylation. Eia kekahi, hiki ke hoʻokō ʻia ka hopena me ka propylene oxide. Hiki iā mākou ke hāʻawi i nā papa ʻelua i hoʻololi ʻole ʻia a me nā papa i hoʻololi ʻia HPMC/MHPC, nona ka manawa wehe lōʻihi, paʻa wai maikaʻi, hana maikaʻi loa a me ke kūpaʻa paheʻe maikaʻi etc.
Hoʻohana nui ʻia ka Hydroxypropyl Methylcellulose (HPMC) Construction Grade i nā Tile adhesives, maloʻo i hui pū ʻia, pā putty, Skim coat, hui hoʻohui, hoʻohaʻahaʻa ponoʻī, sima a me ka plaster based gypsum etc.
Hōʻike Kimia
| Hōʻike | HPMC 60E ( 2910 ) | HPMC 65F ( 2906 ) | HPMC 75K ( 2208 ) |
| ʻO ka mahana gel (℃) | 58-64 | 62-68 | 70-90 |
| Methoxy (WT%) | 28.0-30.0 | 27.0-30.0 | 19.0-24.0 |
| Hydroxypropoxy (WT%) | 7.0-12.0 | 4.0-7.5 | 4.0-12.0 |
| Viscosity(cps, 2% Solution) | 3, 5, 6, 15, 50, 100, 400,4000, 10000, 40000, 60000,100000,150000,200000 | ||
Papa Huahana
| Papa Hana Hana HPMC | Viscosity(NDJ, mPa.s, 2%) | Viscosity(Brookfield, mPa.s, 2%) |
| HPMC TK400 | 320-480 | 320-480 |
| HPMC TK60M | 48000-72000 | 24000-36000 |
| HPMC TK100M | 80000-120000 | 38000-55000 |
| HPMC TK150M | 120000-180000 | 55000-65000 |
| HPMC TK200M | 180000-240000 | 70000-80000 |
Nā kahua noi
1. Kūkulu:
Ma ke ʻano he mea hoʻopaʻa wai a hoʻopaneʻe i ka momi sima, hana ia i ka mīkini pahū. Hoʻohana ʻia ma ke ʻano he mea hoʻopili i ka plaster, putty pauka a i ʻole nā mea kūkulu hale e hoʻomaikaʻi ai i ka pālahalaha a hoʻolōʻihi i ka manawa wehe. ʻO ka waiwai paʻa wai o ka hydroxypropyl methylcellulose HPMC e pale i ka slurry mai ka haki ʻana ma muli o ka maloʻo wikiwiki ʻana ma hope o ka noi ʻana, a hoʻonui i ka ikaika ma hope o ka paʻakikī.
1) Nā Paʻa Kile
Hoʻokō nā mea hoʻopili tile maʻamau i nā koi ikaika a pau o ka C1 tile adhesive. Hiki iā lākou ke hoʻomaikaʻi i ka pale paheʻe a i ʻole ka manawa wehe lōʻihi. Hiki ke hoʻonohonoho maʻamau a i ʻole ka hoʻonohonoho wikiwiki ʻana i nā ʻāpana tile maʻamau.
Pono e maʻalahi ka hoʻopili ʻana i nā kile sima. Pono lākou e hāʻawi i ka manawa hoʻopili lōʻihi, ke kūpaʻa paʻa kiʻekiʻe a me ka ikaika adhesion lawa. Hiki ke hoʻopili ʻia kēia mau waiwai e ka HPMC. Hoʻohana ʻia nā mea hoʻopili no ka waiho ʻana i nā poloka no ke kūkulu ʻana i nā paia o nā ʻāpana ʻāʻī, nā pōhaku one-lime a i ʻole nā pilikia maʻamau. Hoʻopaʻa paʻa maikaʻi ma waena o ka substrate a me nā papa insulating nā mea hoʻopili tile. Hoʻomaikaʻi ʻo HPMC i ka hana o nā mea hoʻopili Tile a hoʻonui i ka adhesion a me ka pale ʻana.
• ʻOi aku ka maikaʻi o ka hana: ua hōʻoia ʻia ka lubricity a me ka plasticity o ka plaster, hiki ke hoʻohana maʻalahi a wikiwiki hoʻi.
• Ka paʻa wai maikaʻi: ʻoi aku ka maikaʻi o ka wehe ʻana o ka manawa lōʻihi.
• Hoʻomaikaʻi i ka hoʻopili ʻana a me ka pale ʻana i ka paheʻe: ʻoi aku ka nui no nā tile kaumaha.
2) Momo maloʻo hui ʻia
ʻO ka mortar maloʻo i hui pū ʻia he hui pū ʻana o nā mea hoʻopaʻa koʻikoʻi, aggregates a me nā mea kōkua. Ma muli o ke kaʻina hana, aia kahi ʻokoʻa ma waena o ka noi lima a me ka mīkini. Hoʻohana ʻia lākou no ka uhi ʻana i ke kumu, ka insulation, ka hana hou ʻana a me nā kumu hoʻonaninani. Hoʻohui ʻia nā mīkini i hoʻohana ʻia i nā mīkini plastering hoʻomau a hoʻopau paha. Hāʻawi kēia i ka uhi ʻana o nā pā nui a me nā wahi kaupaku me kahi ʻenehana maikaʻi loa.
•Easy maloʻo mix formula ma muli o ka wai anuanu solubility: puʻupuʻu hiki ke pale maʻalahi, kūpono no ka kaumaha tile.
•Ka paʻa wai maikaʻi: ka pale ʻana i ka lilo ʻana o ka wai i nā substrates, mālama ʻia ka wai kūpono i loko o ka hui ʻana e hōʻoiaʻiʻo ai i ka manawa ʻoi aku ka lōʻihi.
3) Hoʻonui pono
Hoʻohana ʻia nā pūhui papahele hoʻopaʻa ponoʻī e hoʻomaʻamaʻa a hoʻopaʻa i nā ʻano substrate āpau a hiki ke hoʻohana ʻia i lalo no ka laʻa me nā tile a me nā kapena. No ka pale ʻana i ka sedimentation a me ka mālama ʻana i ka hiki ke kahe, hoʻohana ʻia nā māka HPMC haʻahaʻa viscosity.
• Ka pale ʻana mai ka hoʻoheheʻe ʻia ʻana o ka wai a me ka sedimentation.
•ʻAʻohe hopena i ka slurry fluidity me ka haʻahaʻa viscosity
ʻO HPMC, ʻoiai ʻo kāna mau hiʻohiʻona paʻa wai e hoʻomaikaʻi i ka hana hoʻopau ma ka ʻili.
4) Hoʻopiha māwae
· ʻOi aku ka maikaʻi o ka hana: ka mānoanoa kūpono a me ka plasticity.
ʻO ka mālama ʻana i ka wai e hoʻolōʻihi i ka manawa hana.
· Sag kū'ē: hoʻomaikaʻi ʻia ka hiki ke hoʻopaʻa paʻa.
5) Gypsum i hoʻokumu ʻia
ʻO Gypsum kahi mea hana i kūkulu maikaʻi ʻia no nā noi o loko. Hāʻawi ia i ka hana maikaʻi a hiki ke hoʻololi ʻia kona manawa hoʻonohonoho no kēlā me kēia noi e like me ka mea e pono ai. Hoʻokumu nā mea kūkulu hale gypsum i kahi ea noho ʻoluʻolu ma muli o ke kaulike haʻahaʻa maikaʻi. Eia kekahi, hōʻike ka gypsum i ka pale ahi maikaʻi loa. Akā naʻe, ʻaʻole ia he pale wai, no laila hiki ke hoʻohana i loko wale nō. ʻO ka hui pū ʻana o ka gypsum a me ka lime hydrated he mea maʻamau i nā hana plaster.
• Hoʻonui ka makemake wai: hoʻonui i ka manawa wehe, hoʻonui i ka spry area a ʻoi aku ka hoʻolālā waiwai.
• ʻoi aku ka maʻalahi o ka hoʻolaha ʻana a me ka hoʻomaikaʻi ʻana i ke kūpaʻa sagging ma muli o ka hoʻomaikaʻi ʻana i ke kūpaʻa.
6) Putty Wall/Skimcoat
•Ka paʻa wai: hoʻonui i ka wai ma loko o ka slurry.
• Anti-sagging: i ka wā e hohola ana i ka ʻaʻahu ʻoi aku ka mānoanoa hiki ke pale ʻia ka corrugation.
• Hoʻonui i ka hua mortar: ma muli o ke kaumaha o ka hui maloʻo a me ka hoʻolālā kūpono, hiki i ka HPMC ke hoʻonui i ka nui o ka mortar.
7) Pūnaehana Insulation and Finish System (EIFS)
Hoʻohana ʻia nā mea hoʻopaʻa moena lahilahi sima no ka hoʻopili ʻana i nā tile ceramic, e kūkulu i nā paia o ka aerated concrete a i ʻole ka lime pōhaku pōhaku a hoʻokomo i nā ʻōnaehana hoʻopau insulating waho (EIFS).
• Hoʻonui i ka pili.
• Hiki ke hoʻomaʻemaʻe maikaʻi no ka papa EPS a me ka substrate.
• Hoʻemi ʻia ke komo ʻana o ka ea a me ka lawe ʻana i ka wai.
1. ʻOihana hana: Ma ke ʻano he mea hoʻopaʻa wai a me ka hoʻopaneʻe ʻana i ka pahu sima, hana ia i ka mortar pumpable. Hoʻohana ʻia ma ke ʻano he mea hoʻopaʻa i ka plaster, plaster, putty pauka a i ʻole nā mea kūkulu hale ʻē aʻe e hoʻomaikaʻi ai i ka pālahalaha a hoʻolōʻihi i ka manawa hana. Hiki ke hoʻohana ʻia no ka hoʻopili ʻana i nā tile ceramic, marble, plastic decor, paste enhancer, a hiki ke hoʻemi i ka nui o ka sima. ʻO ka waiwai paʻa wai o ka hydroxypropyl methylcellulose HPMC e pale i ka slurry mai ka haki ʻana ma muli o ka maloʻo wikiwiki ʻana ma hope o ka noi ʻana, a hoʻonui i ka ikaika ma hope o ka paʻakikī.
2. ʻoihana hana ceramic:
hoʻohana nui ʻia ma ke ʻano he binder i ka hana ʻana i nā huahana ceramic.
3. ʻoihana uhi:
Ma ke ʻano he mānoanoa, dispersant a me ka stabilizer i ka ʻoihana uhi, he kūpono maikaʻi ia i ka wai a i ʻole nā mea hoʻoheheʻe organik. E like me ka mea wehe pena.
4. Paʻi ʻīnika:
Ma ke ʻano he mānoanoa, dispersant a me ka stabilizer i ka ʻoihana inika, loaʻa iā ia ka hoʻohālikelike maikaʻi i ka wai a i ʻole nā mea hoʻoheheʻe organik.
5. Plastics:
hoʻohana ʻia e like me nā mea hoʻokuʻu mold, softeners, lubricants, etc.
6.Polyvinyl chloride:
Hoʻohana ʻia ia ma ke ʻano he dispersant i ka hana ʻana o ka polyvinyl chloride a ʻo ia ka mea kōkua nui no ka hoʻomākaukau ʻana o PVC e ka polymerization suspension.
Hoʻopili ʻia
ʻO ka paʻi maʻamau he 25kg / ʻeke
20'FCL: 12 tona me ka pallet; 13.5 tona me ka pallet ole.
ʻO kā mākou hoʻomaikaʻi ʻana e pili ana i ka ʻenehana loea, nā talena koʻikoʻi a me ka hoʻoikaika pinepine ʻana i nā ʻenehana no ka Online Exporter Porcelain Ceramic Industrial Grade Water Absorbent Additive Carboxymethyl Cellulose Powder CMC, Ke nānā nei mākou i ka hana ʻana i nā huahana maikaʻi loa e hoʻolako i ka lawelawe no kā mākou mea kūʻai aku e hoʻokumu i ka lanakila lōʻihi. -lanakila pili.
Mea hoʻopuka pūnaeweleʻO Kina Carboxymethyl Cellulose a me CMC Maʻemaʻe Kiʻekiʻe, I kēia lā, loaʻa iā mākou nā mea kūʻai mai ka honua holoʻokoʻa, me USA, Russia, Sepania, Italia, Singapore, Malaysia, Thailand, Polani, Iran a me Iraq. ʻO ka misionari o kā mākou hui e hāʻawi i nā huahana kiʻekiʻe loa me ke kumukūʻai maikaʻi loa. Ua kakali mākou i ka hana ʻoihana me ʻoe!
