Konke Mayelana Nokhonkolo Wokuzilinganisa

Ukhonkolo ozimele(SLC) iwuhlobo olukhethekile lukakhonkolo oluklanyelwe ukuthi lugeleze futhi lusakazeke ngokulinganayo endaweni evundlile ngaphandle kwesidingo sokudonsa. Ivamise ukusetshenziselwa ukwakha izindawo eziyisicaba nezisezingeni ukuze kufakwe i-flooring. Nakhu ukubuka konke kokhonkolo ozilinganisa ngokwakho, okuhlanganisa ukwakheka kwawo, izinhlelo zokusebenza, izinzuzo, nenqubo yokufaka:

Ukwakheka Kokhonkolo Ozilinganiselayo:

1. I-Binder Material:
   • Isibopho esiyinhloko kukhonkolo ozilinganisayo ngokuvamile usimende wase-Portland, ofana nokhonkolo ovamile.
2. Ama-Fine Aggregates:
   • Izilinganiso ezinhle, njengesihlabathi, zifakiwe ukuze kuthuthukiswe amandla kanye nokusebenza kwento.
3. Ama-Polymers Asebenza Kakhulu:
   • Izithasiselo ze-polymer, njengama-acrylics noma i-latex, zivame ukuhlanganiswa ukuze kuthuthukiswe ukuguquguquka, ukunamathela, nokusebenza kukonke.
4. Ama-ejenti wokugeleza:
   • Ama-Flow agents noma ama-superplasticizers asetshenziselwa ukuthuthukisa uketshezi lwengxube, okuvumela ukuthi ikwazi ukuzenzela.
5. Amanzi:
   • Amanzi anezelwa ukuze kuzuzwe ukungaguquguquki nokugeleza okufunayo.

Izinzuzo Zokhonkolo Wokuzilinganisa:

1. Amandla Okulinganisa:
   • I-SLC yakhelwe ngokukhethekile ukukala izindawo ezingalingani, idale i-substrate eyisicaba futhi ebushelelezi.
2. Ukufaka Ngokushesha:
   • Izakhiwo zokuzilinganisa zinciphisa isidingo somsebenzi omkhulu wezandla, okuholela ezikhathini zokufaka ezisheshayo.
3. Amandla Okucindezela Okuphezulu:
   • I-SLC ingafinyelela amandla aphezulu okucindezela, iyenze ifanele ukusekela imithwalo esindayo.
4. Ukuhambisana nama-Substrates Ahlukahlukene:
   • I-SLC inamathela kahle kuma-substrates ahlukahlukene, okuhlanganisa ukhonkolo, i-plywood, amathayela e-ceramic, nezinto ezikhona zokubeka phansi.
5. Ukuhlukahluka:
   • Ifanele kokubili izinhlelo zokusebenza zangaphakathi nezangaphandle, kuye ngokwakhiwa komkhiqizo othile.
6. Ukuncipha Okuncane:
   • Ukwakhiwa kwe-SLC kuvame ukukhombisa ukuncipha okuncane ngesikhathi sokwelashwa, kunciphisa amathuba okuqhekeka.
7. I-Smooth Surface Finish:
   • Inikeza indawo ebushelelezi futhi elinganayo, esusa isidingo sokulungiswa okubanzi kwendawo ngaphambi kokufaka izambatho zaphansi.
8. Ihambisana neRadiant Heating Systems:
   • I-SLC ihambisana nezinhlelo zokufudumeza ezikhazimulayo, okuyenza ifaneleke ukusetshenziswa ezindaweni ezinokushisa okungaphansi.

Izicelo Ze-self-Leveling Concrete:

1. Ukulinganisa phansi:
   • Isicelo esiyinhloko ukubeka izitezi ezingalingani ngaphambi kokufakwa kwezinto ezihlukahlukene zokubeka phansi, njengamathayili, ukhuni oluqinile, i-laminate, noma ukhaphethi.
2. Ukulungiswa kanye Nokulungiswa Kabusha:
   • Ilungele ukuvuselela izindawo ezikhona, ukulungisa izitezi ezingalingani, kanye nokulungiselela izindawo zokubeka phansi ezintsha.
3. Izindawo Zokuthengisa Nezokuhlala:
   • Isetshenziswa ekwakhiweni kwezentengiselwano nezindawo zokuhlala ukulinganisa phansi ezindaweni ezinjengamakhishi, izindlu zangasese, nezindawo zokuhlala.
4. Izilungiselelo zezimboni:
   • Ifanele izitezi zezimboni lapho indawo esezingeni ibalulekile emishinini, okokusebenza, kanye nokusebenza kahle.
5. Ukufakwa ngaphansi kwamaThayela namatshe:
   • Kusetshenziswa njengendawo engaphansi yamathayela e-ceramic, itshe lemvelo, noma ezinye izembozo zaphansi eziqinile.
6. Izinhlelo zokusebenza zangaphandle:
   • Okunye ukubunjwa kokhonkolo ozilinganisayo kuklanyelwe ukusetshenziswa ngaphandle, okufana namavulandi okulinganisa, ovulandi, noma izindlela zokuhamba.

Inqubo Yokufaka Ukhonkolo Ozilinganisa Ngokwakho:

1. Ukulungiswa kwendawo:
   • Hlanza i-substrate kahle, ususe ukungcola, uthuli nokungcola. Lungisa noma yikuphi ukuqhekeka noma ukungapheleli.
2. Ukwakhiwa (uma kudingeka):
   • Faka i-primer ku-substrate ukuze uthuthukise ukunamathela nokulawula ukumuncwa kwendawo.
3. Ukuxuba:
   • Xuba ukhonkolo ozilinganisa ngokwemiyalo yomkhiqizi, uqinisekise ukuvumelana okubushelelezi nokungenazigaxa.
4. Ukuthulula nokusabalalisa:
   • Thela ukhonkolo oxubile ozilinganisa ku-substrate bese uwusakaza ngokulinganayo usebenzisa i-gauge rake noma ithuluzi elifanayo.
5. I-Deaeration:
   • Sebenzisa irola enezipikili noma amanye amathuluzi okukhipha umoya ukuze ususe amabhamuza omoya futhi uqinisekise indawo ebushelelezi.
6. Ukulungiselela kanye nokwelashwa:
   • Vumela ukhonkolo ozilinganiselayo ukuthi usethe futhi welaphe ngokuya kwesikhathi esishiwo esinikezwe umenzi.
7. Ukuhlola Okokugcina:
   • Hlola indawo eselashiwe ukuze uthole noma yikuphi ukukhubazeka noma ukungapheleli.

Ngaso sonke isikhathi landela izinkombandlela zomkhiqizi kanye nezincomo lapho usebenzisa ukhonkolo ozilinganisa ukuze uqinisekise ukusebenza kahle nokuhambisana nezinto ezithile zokubeka phansi. Inqubo yokufaka ingase yehluke kancane kuye ngokwakhiwa komkhiqizo kanye nezicaciso zomkhiqizi.