Hydroxyethyl Methyl Cellulose

Hydroxyethyl Methyl Cellulose(HEMC) is also named as Methyl Hydroxyethyl  Cellulose(MHEC), it is white methyl cellulose ether derivatives powder, odorless and tasteless, soluble: almost insoluble in hot water, acetone, ethanol, ether and toluene. It is soluble in water and some organic solvents, such as ethanol/water, propanol/water, dichloroethane, in appropriate proportions. The solution has surface activity, high transparency and stable performance. Different specifications of products have different gel temperatures, which is the thermal gelling properties of Hydroxyethyl Methyl Cellulose(HEMC) . The solubility changes with the viscosity. The lower the viscosity, the greater the solubility. Different specifications of Hydroxyethyl Methyl Cellulose(HEMC) have certain differences in performance.

The dissolution of Hydroxyethyl Methyl Cellulose(HEMC) in water is not affected by pH. Value influence. Hydroxyethyl Methyl Cellulose(HEMC) is soluble in hot water, and is insoluble in most organic solvents. Surface-treated Hydroxyethyl Methyl Cellulose(HEMC) disperses in cold water without agglomerating and dissolves slowly, but it can be quickly dissolved by adjusting its pH value to 8~10. ph stability: the viscosity change is small in the range of ph value from 2 to 12, and the viscosity decreases beyond this range.

Chemical Specification

Products Grade

Dissolution method

Add 1/3 of the specified amount of clean water to the container. Add hydroxyethyl methyl cellulose (HEMC) under low-speed stirring, and stir until all the materials are completely wet. Add the other ingredients of the formula and mix well. Attach to the specified amount of cold water to cool and dissolve.

Applications:

1.Dry mixed mortar

High water retention can fully hydrate the cement, significantly increase the bonding strength, and at the same time can appropriately increase the tensile strength and shear strength, greatly improve the construction effect and increase the work efficiency.

2.Wall putty

The cellulose ether in the putty powder mainly plays a role in water retention, bonding and lubrication, avoiding cracks and dehydration caused by too fast water loss, and at the same time enhancing the adhesion of the putty, reducing the sagging phenomenon during construction, and making the construction smoother.

1. Gypsum Plaster

In the gypsum series products, the cellulose ether mainly plays the role of retaining water and increasing lubrication. At the same time, it has a certain retarding effect. It solves the problems of bulging out and insufficient initial strength during the construction process, and can extend the working time.

4.Interface agent

Mainly used as a thickener, it can improve the tensile strength and shear strength, improve the surface coating, and enhance the adhesion and bonding strength.

5.External thermal insulation mortar

Cellulose ether in this material mainly plays the role of bonding and increasing strength. Sand will be easier to coat, improve work efficiency, and have the effect of anti-sagging. The higher water retention performance can extend the working time of the mortar and increase the resistance. Shrinkage and crack resistance, improve surface quality, and increase bonding strength.

6.Tile Adhesive

High water retention eliminates the need to pre-soak or wet the tiles and bases, significantly improving their bonding strength. The slurry can be constructed with a long period of time, fineness, uniformity, convenient construction, and good resistance to wetting and migration.

1. Tile Grout,joint filler

The addition of cellulose ether makes it have good edge adhesion, low shrinkage and high abrasion resistance, protects the base material from mechanical damage, and avoids the impact of penetration on the entire building.

8.Self-leveling material

The stable cohesiveness of cellulose ether ensures good fluidity and self-leveling ability, and controls the water retention rate to enable rapid solidification and reduce cracking and shrinkage.

Packaging:

25kg paper bags inner with PE bags.

20’FCL: 12Ton with palletized, 13.5Ton without palletized.

40’FCL: 24Ton with palletized, 28Ton without palletized.